Latest tongue tester Tenders | Government tongue tester Tenders

CTN :39199198

19 Feb, 2025 NA

Thoothukudi - Tamil Nadu

Tender For lab equipments for strength of materials lab - lab eqipments, hand operated auger boring apparatus, cement mortar cube mould, flow table testing machine, le-chatelier mould, direct shear test apparatus, sieve set for coarse aggregate, sieve set for fine aggregate, liquid limit test apparatus, plastic limit set

CTN :39196763

14 Feb, 2025 NA

Vadodara - Gujarat

Tender For supply of planetary mixer used for testing of cement and pozzolana (q3)

Central Government/Public Sector

CTN :39195831

25 Feb, 2025 13.89 Lacs

East Singhbhum - Jharkhand

Tender For annual civil maintenance work at turamdih mines - earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing specification and direction of the engineer. earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr. disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 km. and up to any lift includind cost of all labours and equipments. surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering but excluding cost of cement. supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. m20 rcc pcc taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. providing and fixing 125 into 63 mm m. s. hinges of approved quality and make. providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 300 into 10 mm providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 150 into10 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete. providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or sh

CTN :39186389

22 Feb, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of supply of super structure over hard standing of size 30mx10mx5m as per tech specification and drawing att. , cement 43 grade opc packed in hdpe bag each 50 kg wt , hardcore 63 to 90mm , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40mm graded , mild steel bars of size 6 to 8mm dia , mild steel bars of size 12 mm and above dia , mild steel bars of size 16 mm and above dia , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , nails various sizes , bricks sub class b , painting brush 4 inch , red oxside paint , synthetic enamel paint , cement opc 43 grade packed in hdpe bag each 50 kg wt , 80 mm thick coloured interlocking precast paver block i shape , distribution box 8 way , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cable 1.5 sqmm single core , cable pvc insulated electric cable 2.5 sqmm single core , pvc casing capping 1 inch , pvc casing capping 3 by 4 inch , switch piano 5 amp 230 volts flush type one way , led tube light fittings 15w 230v box type 4 feet , screw full thread 6 x 19 mm , steel screw full thread with rawl , pvc switch board 7 inch by 4 inch , pvc switch board 8 inch by 10 inch , pvc l and t bend , switch socket combination 2 in 1 15 amp 230 volts , switch socket combination 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1.5 mtr long , service cable pvc insulated aluminium conductor 10 sqmm 2 core , ceiling rose three terminal , led bulk head fitting high pressure die cast , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15 mm dia , pvc round block , earthing plate 600 x 600 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm , funnel fitted with 20 mm diameter gi pipe 1.5 m long. , gi wire 4 mm diameter for earthing. , charcoal , salt normal , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m lon , earthing plate 600x600x6mm gi steel , ci earth pit cover of size 300x300x6mm , insulating pvc block 75x75x30mm , hammer 1 kg with wooden handle , measuring tape 30mtr , crow bar 1.5 inch dia 4 feet long , hammer 1 by 2 kg with handle , hand gloves rubber isi marked , empty drum plastic 200 ltr , hand gloves leather best quality isi marked , gum boot , safety helmet , brick line 30 mtr , traveler brick mason , iron plaster , sprit level , wooden plaster , showel gs mk ii , kassi with handle , axes felling 3 kg , pan morter

CTN :39170326

21 Feb, 2025 NA

Vadodara - Gujarat

Tender For laboratory equipment - computer controlled servo hydraulic compression testing machine, mortar needle penetrometer, jolting apparatus with accessories, hydraulic shrinkage determination, rcc wall core cutting machine, cement mortar mixer, vibrating hammer for concrete mould, u shape box apparatus, l-box apparatus, fill box apparatus-kajima test, wheel borrow (deep), rapid chloride ion permeability test apparatus, for laboratory, cement mortar mould-70.6 x 70.6 x 70.6, cement mortar mould-50 x 50x 50, cement mortar mould-100 x 100x 100, plastic curing tank for concrete moulds, accelerated curing tank (48 cubes), laboratory cement autoclave, muffle furnace, hand gloves for oven, all in one computer system with printer

State Government

CTN :39165376

15 Feb, 2025 22.70 Lacs

Mumbai - Maharashtra

Tender For supply of standard sand grade i, ii and iii for testing of cement samples for the year 2025-2026

State Government

CTN :39156161

07 Feb, 2025 1.34 Lacs

Jaipur - Rajasthan

Tender For supply of electrical items as per annexure-d at sonari lignite project, rsmml, ceu lignite office, barmer - providing & fixing of 240/415 v residual current circuit breaker (rccb) conforming to (is:12640-1)/ iec 61008 -1 , rated 4 kv impulse withstand voltage truly current operated and shall operate on cbct mechanism, provision for pad lock, min. operation 10,000 up to 63 a rating and 5000 for 100 a rating and minimum phase termination capacity of 35 sq.mm. rigid wire, ip 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. rccb 63 amp, 4 pole rccb 100 amp, 4 pole, providing & fixing of iso certified company made tp&n, 415 v ac-23a front handle operated switch disconnector fuse unit, cubical type, without metallic enclosure (for panel mounting), as per pwd specification for electrical works conforming to is/iec 60947-3 : 1999 in existing panel with hbc fuses including making connections with lugs, testing etc as required sfu (switch fuse unit), 63 amp, 3 pole with handle, providing & fixing of 240/415 v ac mcb with positive isolation of 10ka breaking capacity (8/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, lsi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947- 2, low watt losses, trip free mechanism, energy limiting of class 3 as per iec, minimum phase termination capacity of 35 sq.mm. conductor line load reversibility, ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 up to 20 a rating and 10,000 up to 63 a, 5000 for 80 a & above rating including making connections, testing etc. as required. single pole mcb 6a to 32 amp double pole mcb 6a to 32 amp, lightening arrester, sis heavy duty 9 kv, 10 ka, pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia. ' b ' class g.!. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof polypropylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal. all as per pre approved by engineer in charge., providing and fixing 180 cm high fencing with angle iron post size 50x50x6mm placed at every 3 meters apart and 45cm in ground embedded in cement concrete 1:3:6 (30x30x60cm) corner and every 10th.post to the strutted with sox50x6 mm angle iron provided with 6 horizontal lines and 2diagonals of g.l. barbed wire between two post fitted and fixed with g.i. staples including each works in excavation etc. complete., supply & laying following size earth strip in horizontal or vertical run in surface by means of earth strip dmc insulator including riveting/ soldering/ welding, jointing shall be done by overlapping and with 2 set of brass (for cu strip) / gi (for gi strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. all as per pre approved by engineer in charge. 25x3 mm copper strip 30mm x 6mm alum. strip, providing & fixing of iso certified company made lightning conductor finial as per pwd specification for electrical works as per is 2309-1989 made out of 25 mm dia.,300 mm long copper solid rod having single prong at top with 85 mm dia., 3 mm thick copper base plate including holes etc. complete as required. all as per pre approved by engineer in charge.

State Government

CTN :39156162

07 Feb, 2025 1.15 Lacs

Jaipur - Rajasthan

Tender For supply of electric items as per annexure-d at giral lignite project, rsmml, ceu lignite office, barmer. - p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes, din rail etc. as required 2.5 mm thick., providing & fixing of 240/415 v residual current circuit breaker (rccb) conforming to (ls:12640-1)/ iec 61008 -1 , rated 4 kv impulse withstand voltage truly current operated and shall operate on cbct mechanism, provision for pad lock min. operation 10,000 up to 63 a rating and 5000 for 100 a rating and minimum phase termination capacity of 35 sq.mm. rigid wire, ip 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. rccb 63 amp, 4 pole, providing & fixing of iso certified company made tp&n, 415 v ac-23a front handle operated switch disconnector fuse unit, cubical type, without metallic enclosure (for panel mounting), as per pwd specification for electrical works conforming to is/iec 60947-3 : 1999 in existing panel with hbc fuses including making connections with lugs, testing etc as required sfu (switch fuse unit), 63 amp, 3 pole with handle, providing & fixing of 240/415 v ac mcb with positive isolation of 10ka breaking capacity (b/ c/d tripping characteristic as per type of load and site requirement) 4 kv impulse withstand voltage, lsi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947- 2, low watt losses, trip free mechanism, energy limiting of class 3 as per iec, minimum phase termination capacity of 35 sq.mm. ,conductor line load reversibility, ip 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 up to 20 a rating and 10,000 up to 63 a, 5000 for 80 a & above rating including making, connections, testin~ etc. as re_quired., single pole mcb 6a to 32 amp, double pole mcb 6a to 32 amp pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia . ' b ' class g.!. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof polypropylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350 mm. and height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal. all as per pre approved by engineer in charge., providing and fixing 180 cm high fencing with angle iron post size 50x50x6mm placed at every 3 meters apart and 45cm in ground embedded in cement concrete 1:3:6 (30x30x60cm) corner and every 10th.post to the strutted with 50x50x6 mm angle iron provided with 6 horizontal lines and 2diagonals of g.!. barbed wire between two post fitted and fixed with g.!. staples including each works in excavation etc. complete., supply & laying following size earth strip in horizontal or vertical run in surface by means of earth strip dmc insulator including riveting/ soldering/ welding, jointing shall be done by overlapping and with 2 set of brass (for cu strip) / gi (for gi strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. all as per pre approved by engineer in charge. 25x3 mm copper strip 30mm x 6mm alum. strip, providing & fixing of iso certified company made lightning conductor finial as per pwd specification for electrical works as per is 2309-1989 made out of 25 mm dia.,300 mm long copper solid rod having single prong at top with 85 mm dia ., 3 mm thick copper base plate including holes etc. complete as required. all as per pre approved by engineer in charge. providing & fixing of recessed/surface mounting heavy duty enclosure made out from galvanized steel / crca sheet not less then 1.2 mm thick conforming to is-8623-1 & 3 / iec 61439- 1 & 3. powder painted complete with din rail making i

State Government

CTN :39155835

30 Jan, 2025 1.67 Crore

Multi City - Bihar

Tender For procurement of different tools and plants for repairing of distribution transformers at different trws under sbpdcl - welding machine 450 amps , chain pully block 3 mt cap. , chain pully block 5 mt cap. , fire extinguisher 10kg (carbon dioxide) , fire extinguisher 10kg (foam type) , megger (hand driven) 5kv/5000m? , ratio meter (non-automatic) , winding resistance test meter , drill machine 1" , tripod 16? for lifting , electronic multimeter , electronic tongue tester , sling rope with d shakle ? diax7? length , sling rope with d shakle ? diax7? length , ms trolley (6?x3?size) mounted on 4 nos. iron wheel , high voltage testing machine , hydrolic hand pallet truck 3 mt , weighing machine capacity 1 ton , 52" table mounting hand operated press board cutting machine with all accessories , dpc strip covering machine single head

Central Government/Public Sector

CTN :39101478

07 Feb, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply of electrical panel with accessories - c83640001432 supply of electrical panel along with busbar - incomer - outgoing - refer annexure 5a - scope of supply , 100000000001 supply of ip55 or above outdoor distribution box having 200a mccb 25ka incomer - refer annexure 5a - scope of supply , 100000000002 supply of ip55 or above outdoor distribution box having 150a mccb 25ka incomer - refer annexure 5a - scope of supply , 100000000003 supplying of lt power cable with aluminium conductor xlpe insulated pvc inner sheathed galvanised steel-3point5 core of size 70sqmm-refer annexure 5a-scope of supply , 100000000004 supplying of lt power cable with aluminium conductor xlpeinsulated pvc inner sheathed galvanised steel-having 3point5 core of size 300 sqmm-refer annexure 5a-scope of supply , 100000000005 supplying of end termination kit with brass compression gland and aluminium lugs for 3point5c x 70sqmm-refer annexure 5a-scope of supply , 100000000006 supply of end terminations kit of 3point5 core 300 sqmm size of cables - refer annexure 5a - scope of supply , 100000000007 supply of material for earthing with copper earth plate 600 mm x 600 mm x 3 mm thick refer annexure 5a - scope of supply , 100000000008 supply of 25 mm x 5 mm copper strip at 0point50 metre below ground -refer annexure 5a - scope of supply , 100000000009 supply of material for earthing with gi earth plate 600 mm x 600 mm x 6 mm thick -refer annexure 5a - scope of supply , 100000000010 supply of 25 mm x 5 mm gi strip at 0point50 metre below ground as strip earth electrode -refer annexure 5a - scope of supply , 100000000011 supplying of 90 mm dia od 90 mm and id 76 mm nominal size hdpe pipe isi marked-refer annexure 5a - scope of supply , 100000000012 supplying of materials for in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level -refer annexure 5a - scope of supply , 100000000013 shifting loading unloading placing installation testing and commissioning of above mentioned panel this includes foundation civil work-refer annexure 5b-scope of erection , 100000000014 shifting loading unloading placing installation testing and commissioning of above mentionedrefer annexure 5b-scope of erection , 100000000015 making end termination with brass compression gland and aluminium lugs for 3point5c x 70sqmm size of pvc insulated -refer annexure 5b - scope of erection , 100000000016 making end terminations of 3point5core 300 sqmm size of cables -refer annexure 5b - scope of erection , 100000000017 installation testing and commissioning of earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories -refer annexure 5b - scope of erection , 100000000018 installationtesting and commissioning of 25 mm x 5 mm copper strip -refer annexure 5b - scope of erection , 100000000019 installation testing and commissioning of earthing with gi earth plate 600 mm x 600 mm x 6 mm thick including accessories-refer annexure 5b - scope of erection , 100000000020 installation testing and commissioning of 25 mm x 5 mm gi strip-refer annexure 5b - scope of erection , 100000000021 laying of one number pvc insulated and pvc sheathed xlpe power cable above 35sqmm and upto 95 sqmm-refer annexure 5b - scope of erection , 100000000022 laying of one number pvc insulated and pvc sheathed xlpe power cable above 185 sqmm and upto 400 sqmm-refer annexure 5b - scope of erection , 100000000023 laying of one number pvc insulated and pvc sheathed xlpe power cable above 185 sqmm and upto 400 sqmm -refer annexure 5b - scope of erection , 100000000024 laying and fixing of one number xlpe or pvc insulated and pvc sheathed or xlpe power cable -refer annexure 5b - scope of erection , 100000000025 mouling through the existing roads in any kind of soil-laying of hdpe pipe 90mm pipes for cables etc-refer annexure 5b-scope of erection , 100000000026 excavation of the cable trenches in hard rock not exceeding 1point5 metres in width a

Tongue Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

Central Government/Public Sector